Simpson H10A-2 Hurricane Tie
Quantity
-
Detail
Simpson Strong-Tie H10A-2 Hurricane Tie
- Forms part of a continuous load path to resist wind and seismic forces.
- The H10A-2 model holds a double-ply member and is approved for installation with the Strong-Drive SD Connector screw.
- The H10AR model is designed for rough lumber sizes.
- Galvanized (G90). Selected products available in stainless steel or ZMAX coating. See Corrosion Information.
- Use all specified fasteners.
- Hurricane ties do not replace solid blocking.
- H10A optional nailing to connect shear blocking use 0.131″ x 2-1/2″ nails.
- Slots allow maximum field bending up to a pitch of 6:12; use H10A sloped loads for field-bent installation.
The H10A series holds the rafter or truss on both sides for higher uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided ties. H10A models come with optional fastener holes to connect roof blocking to the top plate. Slots allow field bending up to a maximum pitch of 6:12 to accommodate angled blocking.
-
Customer ReviewsNo comments