Almhs Tool Manual Mounting Mini Universal Bending Bender

Almhs Tool Manual Mounting Mini Universal Bending Bender

• Sold By Almhs,Each Set include Special user’s Guide and parts list
• Made of hardened tool steel Mounts on a work bench or held in a vise
• Circle Pins (3/16,1/4 & 1/2” diameter) 1 of each: Circle die ( 1” Diameter), stop pin, sharp angle
• Makes sharp angle bends up to 5/16” diameter rod and 1 x 1/8” flat metal
• Forms wire, flat metal and tubing into clamps, handles, brackets, hooks, coils and more

Bending machine must be fixed on the jaw vice or T slot of machine tool stably. Using two 13-mm(1/2″) shafts, keeping the bending workpiece between block and fixed axis, then rotate the handle a quarter circle, a 90°circle arc lasts. Choosing corresponding specifications of the circle, keeping the workpiece between activity block and circle, loosen the handle after rotating the handle to the right angle, moving the workpiece clamping point then to rotate handle step by step, until the ring form as shown in figure. According to the size of the work piece to select the size of the circle, the circle material can be half a circle, circle, arc curved shapes such as bending. Choosing a appropriate circle and angle module, catching a sheet end between them, loosen the handle after rotating the handle to the right Angle, move the workpiece clamping point to rotating handle, step by step, until the ring form as shown in figure.