Genmitsu Air-Cooled 300W Brush DC Spindle Motor with 0-48V Output Adjustable Switching Power Supply

Genmitsu Air-Cooled 300W Brush DC Spindle Motor with 0-48V Output Adjustable Switching Power Supply, 52mm Clamp & ER11 Collet, Ideal for CNC

• Spindle Motor: New chrome-plated Brush DC motor; This spindle comes equipped with air-cooled function, which can work for a long time.
• Install this spindle set into your CNC machines, then your machines can easily engrave light metal or other hard-to-cut materials.
• Radial run out of spindle: 0.01-0.04; Speed: 3000-12000 r/min (12V-3000r/min, 24V-6000r/min, 36V-9000r/min, 48V-12000r/min).
• The output voltage is adjustable, the output current is not adjustable, and the output current is determined by the load.

Spindle Motor: New chrome plated DC brush motor; This spindle is equipped with air cooling function which can work normally for a long time. Install this spindle set in your CNC machines, then your machines can easily engrave light metal or other hard to cut materials. Spindle rotation speed: 0.01-0.04; Speed: 3000-12000RPM (12V-3000rpm, 24V-6000rpm, 36V-9000RPM, 48V-12000RPM) The output voltage is adjustable. The output current is not adjustable, and the output current is determined by the load. Note: If you want to use it on 3018 series CNC machines, you will need an additional 52mm diameter motor mount. Genmitsu Aluminum Motor Mount for Z Axis (B08SC9K538) would be a good choice.