Tried & True Original Wood Finish

Tried & True Original Wood Finish – Quart

• 100% food contact safe.
• 100% skin contact safe.
• No heavy metal driers.
• Give it a good stir before you apply.
• Allow finish to penetrate the wood for a minimum of 60 minutes.
• Allow the piece to cure for a minimum of 24 hours.
• Burnish with a soft cloth or 0000 steel wool before every coat (even the first and last). The more you rub the better it will look.
• Additional coats will deepen the shine and increase protection. Do not attempt to apply more than three coats of the Original Wood Finish!

Most finishes today contain petroleum distillates, solvents or heavy metal drier additives. This doesn’t. Dubbed a “true general-purpose finish,” its formula is a highly refined polymerized linseed oil with pure beeswax as an additive. It strictly adheres to the standards established by the FDA (Food and Drug Administration) and qualifies as non-toxic and safe for food-contact surfaces in both its uncured and cured (wet and dry) states. Adapted from a Shaker recipe, the finish produces a warm antique sheen that is luminous without appearing glossy. Made using traditional 18th-century production techniques, it is a high-yield finish, providing coverage of at least 75 square feet per 16 fl oz/473ml. Ideal for all interior woodwork, including doors, windows, trim, cabinets and furniture, a thin coat of finish is applied, allowed to penetrate for 60 minutes, wiped, buffed dry and allowed to cure 24 hours between applications. Three coats are recommended for furniture application; two coats are sufficient for most other surfaces. Periodically buff surfaces to maintain sheen. A simple, environmentally-friendly finishing solution available in 16 fl oz/473ml and 32 fl oz/946ml containers. Made in USA. Not available for shipment to California, Colorado, Connecticut, District of Columbia, Maine, Minnesota, Oregon, Rhode Island, Vermont or Washington.