TUQI 5 Hp Spl 3450 Rpm P56 Frame Air Compressor 60 Hz Electric Motor 208-230 Volts Century Motor Single Phase# B385

Tuqi 5 HP SPL 3450 RPM P56 Frame Air Compressor 60 Hz Electric Motor 208-230 Volts Century Motor Single Phase#B385

• ★⚙️5 SPL HP=3.7 HP 3450 RPM, 208-230V, 60Hz
• ★⚙️Full Load amps: 15.0, 56 Frame, Rigid Base; Shaft Diameter: 5/8″ Keyed shaft
• ★⚙️Open Drip-proof, Ball Bearings, SF: 1 Protection
• ★⚙️Rotation: CCW Facing End Opposite Shaft

️5 SPL HP=3.7 HP 3450 RPM, 208-230V, 60Hz ️Full Load amps: 15.0, 56 Frame, Rigid Base; Shaft Diameter: 5/8″ Keyed shaft ️Open Drip-proof, Ball Bearings, SF: 1 Protection ️Rotation: CCW Facing End Opposite Shaft ️Notice: This is your electric motors TRUE power rating. HP ratings have been made suspect over the years by large retailers who like to use “peak HP” or ” SPL ” in their terminology. The Motor’s amp rating does not lie. Please make sure your FL amp (FULL LOAD) rating on the motor you’re replacing is within 10% of the FL Amp rating of the motor you intend to buy. p strong Specification: /strong br / – Horsepower: 5 SPL HP br / – Amperage: 16 fl amps at 230v br / – Phase: One / Single Phase br / – Voltage: 208-230 ( 208 volt is the lowest voltage this motor will handle) br / – RPM: 3450 br / – Frame: 56 br / – Shaft Diameter: 5/8″ Keyed shaft br / – Frequency: 60hz br / – SF: 1 Protection br / – Full Load amps: 15.0 br / – Overload: Yes / Manual reset button br / – Additional Product information: Rigid Base – CL B Insulation 40 C / 104 F Ambient Temp br / br / strong Package includes: /strong br / 1*Air Compressor br / br / strong Attention: /strong br / Not all 5 hp motors are exactly the same. So, with the new motor you’re purchasing, it’s vitally important that you match up the specs on your old motor. All of the information you need to know can be found right on your electric motors nameplate/sticker, which usually can be found on the side of the motor. br / br / strong Note: /strong br / 1: Amperage br / This is your electric motors TRUE power rating. HP ratings have been made suspect over the years by large retailers who like to use “peak HP” or ” SPL ” in their terminology. The Motor’s amp rating does not lie. Please make sure your FL amp (FULL LOAD) rating on the motor you’re replacing is within 10% of the FL Amp rating of the motor you intend to buy. br / Example : If your current motor says 21 FL amps at 230VAC. Then you would be safe replacing your motor with a 19FL amp thru 23 FL amp electric motor 230volt. br / br / 2: Frame Size br / The frame not only constitutes the bolt pattern, it also depicts the overall size and torque. The larger the frame, the stronger the motor. If your current motor you’re replacing shows 56, 143T or 145T on the nameplate. Its extremely important that you replace it with that frame size. Improperly sized motors will inevita /p